The SM-E-CL tubing hanger provides a continuous control line setting using elastomer seals in the both hanger bowl and hanger neck.

The tubing hanger consists of a main body, an elastomer seal and a compression ring. During installation, the hanger is landed and the lockscrews run in to retain the hanger and energize the annulus seal. The neck of the tubing hanger uses S seals to seal against the straight bore of the adapter.

The continuous control line is supported and sealed above and below the hanger with common ferrule-type fittings. The control line exits through the adapter and is sealed off in a specially designed exit block (shown) or nipple/tapped bull plug arrangement.

An internal profile is provided for setting a back pressure valve.